Integrated Color Care Unit | IQ-501
- Automatic colour adjustment
- Automatic front to back registration
- Real time colour adjustment on the fly
- Real time registration adjustment on the fly
- Hands free printer profiling
- Colour Validation
|
Working Table | WT-511
- Working table to place above LU-202m/LU-202XLm
|
Envelope Fusing Unit | EF-107
- Envelope fuser (1/1 speed ratio)
- Center feeding basis
- Feeding direction; Envelope’s flap is opened and set to feed tray with flap at trailing edge.
|
Automatic Document Feeder | DF-713
- Dual color scan document feeder
|
Large Capacity Trays | LU-202m
- Large capacity tray
- 62 to 300 g/m²
- 2,500 sheets ( 80 g/m²)
- A3, B4, A4, A4S, B5, SRA3, SRA4, SRA4S
LU-202XLm (Banner)
- Large capacity tray for long sheets
- 62 to 300 g/m²
- 2,500 sheets ( 80 g/m²)
- A3, B4, A4, A4S, B5, SRA3, SRA4, SRA4S
|
MB-509 Manual Bypass | MB-508
- Min. 100 x 148mm
- Max. 330.2 x 487.7mm
Length of 1300mm possible with MK-760
- SRA3, A3, B4, SRA4, A4, SRA4S, A4S, B5, B5S, A5, A5S, B6S, A6S
|
Paper Feed Unit | PF-602m
- 2 magazines
Paper capacity: up to 6000 sheets
PF-707m
- 3 magazines;
air suction feeding
Paper capacity: up to 4,630 sheets
|
Heating Unit | HT-504
- Dehumidifier fan heater with thermistor for PF-602m
HT-506
- Heating unit for Paper feed units
Includes 3 heater for each tray for PF-710
HT-503
- Dehumidifier fan heater with thermistor for LU-202m/XL/XLm
|
Folding and Punching Unit | FD-503
Pre-printed sheet insertion (PI),
2 PI trays for 500 sheets each,
punching (2 and 4 hole),
folding (half-fold, z-fold, gate-fold,
letter fold in,
letter fold out,
double-parallel-fold),
sub tray for up to 200 sheets
|
Relay Unit | RU-518m
- Cooling and transport function: Cools the paper, accelerates the after-process linear velocity, and discharges
- Reverse output function: Reverses the paper, and hands over to the succeeding after-process machine
- Sub tray function: Discharges and stacks the paper without being restricted from the succeeding after-process machine
- Stacks the paper as receptacle for purge function
- Decurler function: Curl correction function based on belt ＋ironing axis
- Corresponds to correction variability function and real time adjustment
- Density detection function: Density detection function based on transcription paper density sensor
|
Multi (GBC) Punching Unit | GBC Punch G2
- Multi punching unit
- wp-content/uploads: Plain : 75 – 300 g/m²
Coated : 120 – 300 g/m²
- Sheet size tolerance ±0.75mm
- Punch Precision Hole size: ± 2% or less
Position: ± 0.5 mm or less
Burr: ± 0.3 mm or less
Skew: ± 0.6 mm or less
|
Auto Ring Binder | MB-200
- Inline plastic binder
- Modes Bypass mode, Punch mode and Binding punch
|
Booklet Making Unit | SD-506
- Booklet making of up to 50 sheets (200 images),
saddle stitching,
trimming,
output tray for up to 50 booklets,
multi letter fold in (up to 5 sheets),
multi half fold (up to 5 sheets)
SD-513
- Booklet making of up to 50 sheets (200 pages)
Saddle stitching with up to 4 staples with adjustable positions
Multi-letter fold-in (up to five sheets)
Multi-half-fold (up to five sheets)
- Watkiss PowerSquare™ 224KR
- Booklet making of up to 56 sheets
- Saddle stitching with variable staple length
1-6 stitches evenly spaced on the spine of the book
- Front-trimming; optional full bleed trimming available
- Square folding
Offline usage possible
- Plockmatic SD-500/SD-350
- Booklet making of up to 200 pages on SD-500 (50 sheets)
Optional trim module for a smooth front-edge trim of the booklet
Optional square-fold module turns saddle-stitched booklets into professional flat square-folded books
Offline use also possible
|
Creasing Unit | CR-101
- Saddle stitch/Half-fold+Crease
- Tri-fold + Crease
- Perfect Binder+Crease
- Free Crease
|
Slitting Unit | TU-510
- Sub tray mode
With trimming
|
Spine Corner Forming Unit | FD-504
- Spine Corner Forming (flat back) of booklets
|
Stacking Unit | LS-507
- Type – Grip convenyance type horizontal stacker
- Modes – Straight mode, Stack mode, Offset stack mode, Sub tray mode
|
Perfect Binding Unit | PB-503
- Hot melt glue binding system
Integrated 1-side trimming of cover sheets
- Books from A5 up to A4+ (307 x 221 mm)
- Books from 10 sheets up to 30 mm spine width
- Cover paper tray for up to 1,000 sheets
- Sub tray for up to 200 sheets
- Book stacking capacity of up to 3,300 sheets
2 stacks
|
Stapling Finisher Unit | FS-532m
The Finisher with Staple Function and AiO Options
- Staple sheets – Up to 100 sheets
- Staple position – 1 in the back, 1 in the front or 2 in the centre
- Tray capacity –
2 sheets stapling – 180 sets
5 sheets stapling – 150 sets
10 sheets stapling – 130 sets
25 sheets stapling – 120 sets
50 sheets stapling – 60 sets
100 sheets stapling – 30 sets
|
Saddle Stitching Kit | SD-510
- Booklet making of up to 20 sheets (80 images)
- Saddle stitching
cover sheets up to 300 gsm
output tray for booklets
multi-letter fold-in (up to 5 sheets)
multi-half-fold (up to 5 sheets)
|
Post Inserter | PI-502
- Insertion of pre-printed sheets; PI trays for 200 sheets each
|
Punch Kit | PK-525
- 2 holes – Yes
- 4 holes – Yes
- wp-content/uploads Weight: 52 to 300 g/m²
|
Humidifier Unit | HM-103
- Humidification function: Function performing humidification of the
paper
- Electric charge reduction function: Function for increasing
humidification to the paper, and reducing the amount of electric
charge
|
Banner Tray | MK-760
- Enables banner feeding and paper reversal during paper output
- Up to 300.2 x 1,300 mm (without trimming)
|
Open Stacker | OT-510
- Output for up to 4,200 sheets (A4)
- Sub tray for up to 300 sheets
- Auto-shift sorting and grouping
- Sub tray for up to 200 sheets
|
Envelop Kit | MK-746
- Envelope Kit for LU-202m and LU-202XLm
|
